MDalton Posted June 8, 2011 Report Share Posted June 8, 2011 Hey guys, I bought the quad with the rear brake removed, so i've been trying to put it on and am having trouble. It seems the brake stay is to far left or the rotor is to far right? I could just put some washers on the bolts that hold the caliper on to push it out a little bit. Here some pics Quote Link to comment Share on other sites More sharing options...
MDalton Posted June 8, 2011 Author Report Share Posted June 8, 2011 Anyone who runs into the same issue, there is spacers lol. Quote Link to comment Share on other sites More sharing options...
Duneman101 Posted June 8, 2011 Report Share Posted June 8, 2011 you are supposed to have a small spacer in there, it's about 3/4 of an inch long if i remember right. Quote Link to comment Share on other sites More sharing options...
Phelps Posted June 8, 2011 Report Share Posted June 8, 2011 i used washers until tim at stellar made me some shims. call him up i am sure he would cut you some. Quote Link to comment Share on other sites More sharing options...
camatv Posted June 8, 2011 Report Share Posted June 8, 2011 i also use washers if the alluminum spacers are missing.. after the lathe is running i'll just make my own spacers.. the parting line on the caliper is where i like to line the rotor up to Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.