MDalton Posted June 8, 2011 Report Posted June 8, 2011 Hey guys, I bought the quad with the rear brake removed, so i've been trying to put it on and am having trouble. It seems the brake stay is to far left or the rotor is to far right? I could just put some washers on the bolts that hold the caliper on to push it out a little bit. Here some pics Quote
MDalton Posted June 8, 2011 Author Report Posted June 8, 2011 Anyone who runs into the same issue, there is spacers lol. Quote
Duneman101 Posted June 8, 2011 Report Posted June 8, 2011 you are supposed to have a small spacer in there, it's about 3/4 of an inch long if i remember right. Quote
Phelps Posted June 8, 2011 Report Posted June 8, 2011 i used washers until tim at stellar made me some shims. call him up i am sure he would cut you some. Quote
camatv Posted June 8, 2011 Report Posted June 8, 2011 i also use washers if the alluminum spacers are missing.. after the lathe is running i'll just make my own spacers.. the parting line on the caliper is where i like to line the rotor up to Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.