shee thing Posted May 30, 2011 Report Posted May 30, 2011 Need some help I got a few issuse an have been reading but can't seem to figure it out I bought an oversized rad an since I put it on I've been having problems it first wanted to spit out the over flow bottle so I removed it but I'm unsure really wat the proper way would be do I leave a short line off the top of the rad or do I block it off an another problem is when I'm putting around in first an second an lay on the throttle it seems like the choke is on an won't rev out until I pull the clutch in an crank it up wat you guys think Quote
sleeper06 Posted May 31, 2011 Report Posted May 31, 2011 Need some help I got a few issuse an have been reading but can't seem to figure it out I bought an oversized rad an since I put it on I've been having problems it first wanted to spit out the over flow bottle so I removed it but I'm unsure really wat the proper way would be do I leave a short line off the top of the rad or do I block it off an another problem is when I'm putting around in first an second an lay on the throttle it seems like the choke is on an won't rev out until I pull the clutch in an crank it up wat you guys think Either you filled it up too much or it blew a head gasket thats why its running hot,whats your mods and jetting at now we need a baseline to help you properly Quote
shee thing Posted May 31, 2011 Author Report Posted May 31, 2011 I've got a vitos 404 big bore kit hemi2 head trinity 2into1 35mm kiehin carb v force2 reeds oversized rad vitos impeller I've got a 58pilot an a 190main k&n air filter with no box my mix is 40-1 an half 93 an the other half turbo blue I ride in ky berea Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.