NetBSD Posted April 16, 2011 Report Posted April 16, 2011 Elevation 1,309ft. i got a new airbox to replace my half melted one and it has a aftermarket foam filter that i plan on running with no lid, bike already has T5's on it and im gunna pull the carbs to check the jetting, about where should i be at with the jets and needle setting? Quote
sleeper06 Posted April 16, 2011 Report Posted April 16, 2011 27.5 pilot,280-290mains,needle 4th clip,start at 1-1/2 out on the screws Quote
NetBSD Posted April 16, 2011 Author Report Posted April 16, 2011 27.5 pilot,280-290mains,needle 4th clip,start at 1-1/2 out on the screws is that 4th clip from the top or bottom? Quote
sleeper06 Posted April 16, 2011 Report Posted April 16, 2011 4th from blunt end 2nd from pionty Quote
NetBSD Posted April 16, 2011 Author Report Posted April 16, 2011 4th from blunt end 2nd from pionty thanks Quote
NetBSD Posted April 19, 2011 Author Report Posted April 19, 2011 pulled the carbs apart, real clean. main jets a 200, the bike did have a full air box when i got it so does that sound right? should i still bump it up to 280 just for removing the lid? didnt get to pull the pilots, need a smaller screwdriver Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.