gstaten24 Posted April 15, 2011 Report Posted April 15, 2011 so i just got a set of 35 mm pwks. when i had stock carbs i was running 35 pilots and 330 mains. my mods are cpi in frames, v force reeds, chariot cool head 20cc domes, pod filters, 4 mill crank with dune port cylinders. what should i start with as far as jetting, ive been told a 155 or 158 with a 48 or 50 pilot. however when they setup my carbs at the factory they put in 172 mains and 55 pilots. any help is greatly appreciated!! Quote
sleeper06 Posted April 15, 2011 Report Posted April 15, 2011 48,155s cel 4th clip,if it came with a cgl you can get it to work but in a few cases i had to swap it out Quote
gstaten24 Posted April 15, 2011 Author Report Posted April 15, 2011 48,155s cel 4th clip,if it came with a cgl you can get it to work but in a few cases i had to swap it out is there a way to tell what kind of clip it is? ill take it apart and see which clip its on Quote
gstaten24 Posted April 15, 2011 Author Report Posted April 15, 2011 ok i took it apart and it looked like it said dgk on the clip. it might have been dgl because on keihins website i didnt see a dgk option. Quote
sleeper06 Posted April 17, 2011 Report Posted April 17, 2011 the d series is a richer needle,if you get them to work you might find you need a smaller main jet,all my jetting is done based off cel needle, but i have found larger diameter needles needing smaller mains Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.