Infamous039 Posted April 12, 2011 Report Posted April 12, 2011 Need some help starting my jetting, I have reached out to Herr Jugs but havent been able to get anyone on the phone. My mods are listed below, please give me some advice on starting point (get me as close as possible). Thanks Guys Mods: CPI Inframe pipes V-Force 3 Reeds +4 Timing Cool Head 21cc domes Herr Jugs Agressive Trail Ported Cylinders Stock Carbs w/ TORS removed POD filters w/ outerwears Wiesco Piston kit Stock Stroke Crank Quote
Infamous039 Posted April 12, 2011 Author Report Posted April 12, 2011 Compression test showed 151psi right cylinder and 150psi left cylinder Quote
sleeper06 Posted April 13, 2011 Report Posted April 13, 2011 320 -340 main,27.5 pilot,stock needle 4th clip.Prob need 320s now -340s in winter Quote
Infamous039 Posted April 13, 2011 Author Report Posted April 13, 2011 Ok, I will try those jets. I have 330main jets do you think those would be pretty close ??? I have already ordered 27.5 pilots which should be here in the mail today. As far as the needle clip goes, am I raising the needle or lowering it into the carb by placing it on the 4th clip ???? I have it set on the middle clip right now. Quote
dcalsv02 Posted April 13, 2011 Report Posted April 13, 2011 Ok, I will try those jets. I have 330main jets do you think those would be pretty close ??? I have already ordered 27.5 pilots which should be here in the mail today. As far as the needle clip goes, am I raising the needle or lowering it into the carb by placing it on the 4th clip ???? I have it set on the middle clip right now. I dont know what your elelvation is but i would bet sleeper06 is saying put the needle on the 2nd clip from the bottom (aka 4th clip i believe), which will make it more rich. Quote
Infamous039 Posted April 13, 2011 Author Report Posted April 13, 2011 I dont know what your elelvation is but i would bet sleeper06 is saying put the needle on the 2nd clip from the bottom (aka 4th clip i believe), which will make it more rich. Ok, I will place the needle in that clip this afternoon. I currently have it placed in the middle clip. Quote
sleeper06 Posted April 13, 2011 Report Posted April 13, 2011 i would start at 340s if you got em,and yes 2nd clip from piont or 4th from blunt end Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.