WHICH MODS 1ST

[mar2001]

Hello folks I'm new here and new to banshee I have a 2001 banshee with t6s and I'm looking to mod it for more power without changing my pipes which mods I can do to add power its all stock besides pipes thanks

[#1JUANstunna]

VF2's or 3's reeds, advance your timing is two easy ones.

 

Porting even though the t6's are for a stock motor. If you're going to mod the engine up you will have to change pipes. http://www.toomey.com/html/pipe_systems.htm

 

Then larger carbs.

 

This is an never ending list!

[mar2001]

Thanks a lot so I should first change to the t5s

[98MonsterShee]

VF2's or 3's reeds, advance your timing is two easy ones.

 

Porting even though the t6's are for a stock motor. If you're going to mod the engine up you will have to change pipes.

 

Then larger carbs.

 

This is an never ending list!

 

Not Necessarily, Im running T-6's on my 98 w +4 timing, cool head 22cc domes, k&n w no air lid about to install some vf 3's iv had no problems with the T-6's so far....after i port i might change other than that

 

But cheap easy mods would be advancing your timing...theres a DIY sticky posted on here, or order one for around45-50 bucks

vf 2/3's, cool head w smaller domes like he said the list never ends......Good luck w it tho

[sangheraent]

boost bottle.

[mar2001]

I thought a boost bottle was a waist of money

[#1JUANstunna]

I thought a boost bottle was a waist of money

 

He is! It's a common joke around here.

[06specialedition]

If you only have pipes, you still can do alot of bolt ons for power.

 

Air filter or ditch air box and run pods, reeds, advanced timing, cool head or milled head....sky is the limit.

[mar2001]

Ok so for start I'm going to do the timing plate and vfroce3 that's going to run me 350 is this about right

[06specialedition]

Ok so for start I'm going to do the timing plate and vfroce3 that's going to run me 350 is this about right

 

350? No. Try like 250 at the most.

 

$200 shipped for reeds:

http://cgi.ebay.com/ebaymotors/Banshee-V-Force-3-Reeds-Cages-VForce-Yamaha-YFZ-350-/330540820922?pt=Motors_ATV_Parts_Accessories&hash=item4cf5c4a9ba#ht_653wt_935

 

$35 for timing plate: http://www.rickystator.com/catalog/yamaha-banshee-adjustable-timing-plate-p-131.html

[mar2001]

350? No. Try like 250 at the most.

 

$200 shipped for reeds:

http://cgi.ebay.com/ebaymotors/Banshee-V-Force-3-Reeds-Cages-VForce-Yamaha-YFZ-350-/330540820922?pt=Motors_ATV_Parts_Accessories&hash=item4cf5c4a9ba#ht_653wt_935

 

$35 for timing plate: http://www.rickystator.com/catalog/yamaha-banshee-adjustable-timing-plate-p-131.html

thanks cause they wanted 60 for the timing plate and 250 for the reeds

[dwill34]

hows it going guys im reading what ur writing and im interested my self. i just got a 98 banshee and would like to learn a lil more bout em. my first question is what are reeds and what do they do?

[FullThrottle_06']

hows it going guys im reading what ur writing and im interested my self. i just got a 98 banshee and would like to learn a lil more bout em. my first question is what are reeds and what do they do?

 

 

Dito... I was curious about that exact same question.