stator question

[banshee_kid350]

Okay does anyone out their know what the yellow and black wires do for the stator? The manuel says lighting coil resistance.

All of my wires test good for the stator other than this wire. Will this be enough for it not to start? Or does it run the lights or something stupid like that?

I have checked everytrhing that I can thing of,key switch,kill swith,ohmed out the coil,checked pickup coil gap. I just hate to order a stator when it could be the cdi.

 

Also I looked through the little holes on the flywheel to see if I could see any obvious damage to the stator

And I can see the windings on some of the stator posts and on others it has the sealant around it still (Not sure what the correct name is). Do all of the post usually have

that sealant around the windings or do some have it and some dont?

 

Need to get this thing running again. Worst case I Just order the cdi and the stator. Any input will be very helpful thx.

[gotta_goatsfast]

The stator has two seperate winding coils. One winding coil supplies power to the CDI. The other winding coil (your black and yellow wire) power your lighting system. Your engine will spark and will run without a functioning lighting circuit as long as the ignition circuit is functioning properly.