need advice on jetting my 02 shee

[bns_blueticks]

I have a 02 shee it has fmf gold series fatty pipes, fmf powercore 2 mufflers, fmf boost bottle , the t.o.r.s has been removed, no airbox with dual k and n air filters I just ordered a set of boyesen pro series dual stage reeds. I don't know what size jets to get I live in WV could really use some advice thanks

[armyvet]

I have a 02 shee it has fmf gold series fatty pipes, fmf powercore 2 mufflers, fmf boost bottle , the t.o.r.s has been removed, no airbox with dual k and n air filters I just ordered a set of boyesen pro series dual stage reeds. I don't know what size jets to get I live in WV could really use some advice thanks

 

 

normally i would think 250ish but since you have the pod filters i would start at 280 or so on the mains just to be safe.You might end up a size or so smaller but start high and watch plugs.search this forum lots of guys runnin similar setups.good luck to ya

[justinkk2005]

I have a 02 shee it has fmf gold series fatty pipes, fmf powercore 2 mufflers, fmf boost bottle , the t.o.r.s has been removed, no airbox with dual k and n air filters I just ordered a set of boyesen pro series dual stage reeds. I don't know what size jets to get I live in WV could really use some advice thanks

 

 

I would say 27.5 pilots, needles on the center clip, and 320-330 mains.... (start with the 330)

 

I live in Eastern, KY and that was around my setup.

[armyvet]

i said 280 because i have a full on agressive port joib and im running 350>i do have the 2into 1 toomey air filter though..just keep and eye on your plugs