TheBigShabowski Posted March 2, 2011 Report Posted March 2, 2011 I'm doing the trans mod where u grind the gears. On the gears with the outside tabs do I have to go all the way down or just down to the inner and outer ledges. Quote
Coupelx Posted March 2, 2011 Report Posted March 2, 2011 you just have to go down even with the ring around the outside edge of the gear. you should not have to gow down into the gear. i did not realize this until reassembly. It will save alot of time and evergy too. just make sure to check they clear the dogs on the mating gear when you reassemble. o and if you are a scatter brain like me, bikebandit.com has a nice exploded view of the transmission and all the washers and clips under the OEM parts section. Quote
TheBigShabowski Posted March 2, 2011 Author Report Posted March 2, 2011 you just have to go down even with the ring around the outside edge of the gear. you should not have to gow down into the gear. i did not realize this until reassembly. It will save alot of time and evergy too. just make sure to check they clear the dogs on the mating gear when you reassemble. o if you are a scatter brain like me, bikebandit.com has a nice exploded view of the transmission and all the washers and clips under the OEM parts section. Thanks for the info. I have a clymers so putting back together was pretty easy. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.