03 Banshee LE Posted February 6, 2011 Report Posted February 6, 2011 I just recently bought my first banshee so I have absolutely no clue about 2 strokes much less a banshee so bear with me. My clutch cable popped off the bracket on top of the transmission almost under the left carb and i was wondering if somebody could show me a detailed pic of how theres is hooked up? Quote
WINDYCITYJOHN400 Posted February 6, 2011 Report Posted February 6, 2011 You'll learn faster and have better help in the days and years to come if you start by getting a CYMERS manual for your machine. It's full of picture like you just asked for, all your machines torque specs and step by step instruction for thigs like that. The cable can't pop off there unless your bolt and bracket came off that holds the cable in place. Sounds like you may need some pieces..... Quote
bigblockbanshee Posted February 6, 2011 Report Posted February 6, 2011 ^^^What he said.^^^ This is where I got mine and is the cheapest "shipped" price I could find. This should be a Banshee enthusiast's FIRST investment. http://cgi.ebay.com/ebaymotors/Yamaha-YFZ350-Banshee-1987-2006-Clymer-Manual-M486-6-/200436053985?pt=Motors_Manuals_Literature&hash=item2eaaeb77e1 Quote
03 Banshee LE Posted February 6, 2011 Author Report Posted February 6, 2011 You'll learn faster and have better help in the days and years to come if you start by getting a CYMERS manual for your machine. It's full of picture like you just asked for, all your machines torque specs and step by step instruction for thigs like that. The cable can't pop off there unless your bolt and bracket came off that holds the cable in place. Sounds like you may need some pieces..... No i was in the garage messin with the clutch and adjusting the handlebars when it popped off and no pieces came off I was just wondering how it should be hooked back up.... Quote
03 Banshee LE Posted February 6, 2011 Author Report Posted February 6, 2011 No i was in the garage messin with the clutch and adjusting the handlebars when it popped off and no pieces came off I was just wondering how it should be hooked back up.... ok i figured out how to route it now i need to know where i can get the spring that the clip is on? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.