Thack82 Posted February 2, 2011 Report Posted February 2, 2011 2004 OEM Yamaha Banshee Plastic With Graphics!! Complete set in great shape! White with Ghost Flames! Please waitImage not available I need to sell this plastic so I can finish up my custom Endurance/Trail Banshee. I need a Hydraulic Clutch kit and I'm not buying it until I liquidate some of my spare parts, well that and thats what my wife said I needed to do. So help out my cause. This is a great lightly used Complete set of White Plastic with a combination of two graphic kits, and a lot of other Performance Parts Manufactures Stickers. The graphics are protected by a clear thin U.V. Resistant 3M Vinyl that prevent the power washer from blowing them off when you wash the plastic as well as keep the plastic from fading, and it's added protection. If you want to take the graphics off go to Wal-Mart and buy a can of 3M Adhesive remover, it will bring them right off. My Banshee has never been flipped, they plastics are in NO way cut, cracked or broke. It has always been stored inside under a felt cover. The plastic has always been conditioned, cleaned and polished with a combination of NOVIS Plastic Polish Cleaner and Scratch Remover, PLASTEX Fine Plastic Polish, and PLEXUS (I added pictures of those products to this listing for the buyer's use ). Before I used those products I used Pledge Multi-Surface Cleaner and Conditioner. I did not clean the plastic before I took these pictures what you see is what you get, a little cleaner, conditioner, and polish will really make this plastic look like new. <br style="font-weight: bold; font-style: italic;"><br style="font-weight: bold; font-style: italic;"> I planed on keeping this set of Plastic, after I ordered my other two sets from Maier, I ordered one complete set of Black Custom "Raptor" Style Plastic from Maier, then I started missing the old Banshee retro look So I ordered a Red set of Maier OEM Style Plastic and a Billet DZUS fast connect/disconnect Fastener Kit so I could swap out the Plastic depending on my mood and what I was doing. The Maier Plastic I bought doesn't fit as well as the Yamaha OEM Plastic, and this set has over $100 worth of graphics and stickers! I also have alot of like new Yamaha Banshee Parts, C-5 Z06 Corvette Parts, LB7 Duramax Diesel Parts, Hummer H3 Parts, and 1993-1997 Camaro Z28 Parts going on eBay, so please take a look at my other take off parts and items from all my toy collection that must go. Shoot me a message if you have any questions. $300 Plus 50 Shipping Quote
Thack82 Posted February 2, 2011 Author Report Posted February 2, 2011 2004 OEM Yamaha Banshee Plastic With Graphics!! Complete set in great shape! White with Ghost Flames! Please waitImage not available I need to sell this plastic so I can finish up my custom Endurance/Trail Banshee. I need a Hydraulic Clutch kit and I'm not buying it until I liquidate some of my spare parts, well that and thats what my wife said I needed to do. So help out my cause. This is a great lightly used Complete set of White Plastic with a combination of two graphic kits, and a lot of other Performance Parts Manufactures Stickers. The graphics are protected by a clear thin U.V. Resistant 3M Vinyl that prevent the power washer from blowing them off when you wash the plastic as well as keep the plastic from fading, and it's added protection. If you want to take the graphics off go to Wal-Mart and buy a can of 3M Adhesive remover, it will bring them right off. My Banshee has never been flipped, they plastics are in NO way cut, cracked or broke. It has always been stored inside under a felt cover. The plastic has always been conditioned, cleaned and polished with a combination of NOVIS Plastic Polish Cleaner and Scratch Remover, PLASTEX Fine Plastic Polish, and PLEXUS (I added pictures of those products to this listing for the buyer's use ). Before I used those products I used Pledge Multi-Surface Cleaner and Conditioner. I did not clean the plastic before I took these pictures what you see is what you get, a little cleaner, conditioner, and polish will really make this plastic look like new. <br style="font-weight: bold; font-style: italic;"><br style="font-weight: bold; font-style: italic;"> I planed on keeping this set of Plastic, after I ordered my other two sets from Maier, I ordered one complete set of Black Custom "Raptor" Style Plastic from Maier, then I started missing the old Banshee retro look So I ordered a Red set of Maier OEM Style Plastic and a Billet DZUS fast connect/disconnect Fastener Kit so I could swap out the Plastic depending on my mood and what I was doing. The Maier Plastic I bought doesn't fit as well as the Yamaha OEM Plastic, and this set has over $100 worth of graphics and stickers! I also have alot of like new Yamaha Banshee Parts, C-5 Z06 Corvette Parts, LB7 Duramax Diesel Parts, Hummer H3 Parts, and 1993-1997 Camaro Z28 Parts going on eBay, so please take a look at my other take off parts and items from all my toy collection that must go. Shoot me a message if you have any questions. $300 Plus 50 Shipping If the buyer doesn't want the graphics I will strip them off, wash, polish, and condition the plastic before I ship it to you free of charge. Then you can leave it plain white, or put any graphic kit on it you want. Thanks, Jim Quote
Thack82 Posted February 2, 2011 Author Report Posted February 2, 2011 HotCams! It was in the box with the HotRods Crank I bought. Quote
Thack82 Posted February 2, 2011 Author Report Posted February 2, 2011 I will trade this plastic for a Hydraulic Clutch set up like the one pictured bellow, and a couple of front Brake clamps/mounts that will attach to aftermarket a arms. If anyone wants to do some swapping. Quote
Thack82 Posted February 7, 2011 Author Report Posted February 7, 2011 (edited) SOLD Edited February 7, 2011 by Thack82 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.