crash&burn Posted January 27, 2011 Report Posted January 27, 2011 So i am in the process putting a 4 mill in my banshee i have been buying parts here and there when the price is right and i got everything besides the 4mill crank... due to budget and other expenses occuring i don't have the cash flow right now to get one..... so i want to know if these 35mm PWK will be overkill or not with these mods until i get the crank it will have stock stroke, stock bore, dune port, coolheed with 21cc or 17cc domes, K&N pods, T5's, Vf2's reeds, intake spacers, and i think thats it i don't have the stock carbs no more so i can't put them back on so are these too much carb for to little motor or will i be ok Quote
crustydemon Posted January 27, 2011 Report Posted January 27, 2011 I think you will be ok with the 35's untill you get the 4 mill. You are going to sacrifice some throttle response but it will be fine. Quote
Wicked ATV Posted January 27, 2011 Report Posted January 27, 2011 x2 the 35's will work. Especially if your cylinders are ported? Quote
wacko2000 Posted January 27, 2011 Report Posted January 27, 2011 You will be fine, NYCMarine was running HJR ported cylinders, 35's, DMC aliens on pump gas and the bike was a rocket. Throttle response was insane from bottom to top, zero hesitation Joe Quote
crash&burn Posted January 27, 2011 Author Report Posted January 27, 2011 Alright thanks guys i know from experience on my big block in truck i had to big of a carb on there figuring the same concept here with the banshee and just had to check this out thanks for the info guys Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.