hillbillyshee Posted January 18, 2011 Report Posted January 18, 2011 ok guru of the shee world bike is pretty stock bored over a little need alittle advice on jetting. bike is bored over .25mm with compressing of 120. trinty stage 4 pipes two into one kn, v force 3, i bought a cool head with 21cc domes havent got it yet but im expecting to get about 150 psi of compresion after install. is there any rule of thumb on jetting up? main jet, needle, pilot any help would help at least get me in the ballpark ill fine tune from there thanks in advance Quote
06specialedition Posted January 18, 2011 Report Posted January 18, 2011 ok guru of the shee world bike is pretty stock bored over a little need alittle advice on jetting. bike is bored over .25mm with compressing of 120. trinty stage 4 pipes two into one kn, v force 3, i bought a cool head with 21cc domes havent got it yet but im expecting to get about 150 psi of compresion after install. is there any rule of thumb on jetting up? main jet, needle, pilot any help would help at least get me in the ballpark ill fine tune from there thanks in advance Welcome to BHQ! Installing a cool head does not affect jetting. Quote
hillbillyshee Posted January 18, 2011 Author Report Posted January 18, 2011 Welcome to BHQ! Installing a cool head does not affect jetting. ok thank you for info i should be on my way then. Quote
01blackshee Posted January 27, 2011 Report Posted January 27, 2011 Welcome to BHQ! Installing a cool head does not affect jetting. x2 maybe if you were running domes under 20cc but ur not so ur good to go!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.