stock bore/ unported cylinders for sale

[gotta_goatsfast]

Here's a set of cylinders I have for sale. They are still on the stock bore, and have not been ported or carved on. I will include the pistons if you wish. The pistons do have some pitting. The set up ran beautifully before tear down (going with a serval top end) In the pictures, the cylinders have longer head studs (for pro-design head). I can leave them in for you, or pull them if you don't want the studs. I'd be happy to get $220 shipped for everything. Would trade for lock up clutch, longer swingarm, or possibly other items that would pertain to my build. Thanks for looking!

 

 

[Phelps]

i will have a lockup cover freshly built/polished and a used lockup unit in a few days if your interested. it a trinity DIY cover. solid billet (no lexan) says stage IV on the side.

[gotta_goatsfast]

i will have a lockup cover freshly built/polished and a used lockup unit in a few days if your interested. it a trinity DIY cover. solid billet (no lexan) says stage IV on the side.

 

You have my attention! Is there a way for me to modify it or bolt on a lexan cover?

[Phelps]

You have my attention! Is there a way for me to modify it or bolt on a lexan cover?

i highly doubt it. here is what the outer DIY kit looks like. i cut the stock covers and epoxy it in just like all the other brands do. i can do a painted cover, polished cover, or bare cast your choice.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250662698274&ssPageName=ADME:X:RTQ:MOTORS:1123

[gotta_goatsfast]

I'm more interested in a lexan cover, but I'll deffinately keep your set up in mind.

[bad 350 shee]

interested in some 34mmpj"s??

[gotta_goatsfast]

interested in some 34mmpj"s??

 

I already picked up two 35mm Keihin PWKs for the build. Thanks for the offer though!

[gotta_goatsfast]

cylinders are going out to rjatv. Thanks for veiwing!