Stock Banshee motor

[Rotax Raptor]

This is a good running motor taken out of a running Banshee. I took this motor in on a partial trade on a stroker motor I sold and put in a guys Banshee. I rode the Banshee before the motor was pulled and it ran great. The guy that had this was at Waynoka with us 2 weeks prior and rode it all weekend with zero problems. The motor has some port work done by FMF. I have never seen a motor ported by FMF before but they did a great job, intake, transfers and exhaust. I pulled the cylinders off to check the rod bearings on the crank and they checked out good. I did install new wrist pin bearings in the pistons while putting it back together. The piston size is 64.42mm and the cylinders and pistons are in good shape, no scrape or scares.

The stock intakes and reed valves, full clutch and the stator cover are included .

Motor come complete minus these items. Stator and pickup coil, Water pump and gear, Water pump cover, the hose and water jacket goning from the head to the clutch side cover.

$625.00 and you pay actual shipping and paypal fee if you can't send it as a gift. I would rather ship to the lower 48 of the great USA!

Send me an PM or add a phone number if you want more info or close up pictures of anything.

I would be open to some Drag Banshee related items for trade. I am looking for some forward drag a arms, 10 mil crank or whatever drag parts you may have extra.

 

http://i918.photobucket.com/albums/ad29/jakejonjimmy/007-1.jpg

http://i918.photobucket.com/albums/ad29/jakejonjimmy/006-1.jpg

http://i918.photobucket.com/albums/ad29/jakejonjimmy/005-1.jpg

[trex banshee]

where are you located?

[Rotax Raptor]

where are you located?

Kansas 66109