252wheelieking Posted November 20, 2010 Report Posted November 20, 2010 I have some 34mm PJ's & needed to know: If the air/fuel screw is seated & I turned the air/fuel screws out-to the left. What would I be controlling the air or fuel? Quote
Darthwall Posted November 20, 2010 Report Posted November 20, 2010 you are controlling the fuel mixture if you have a hjr dune port this is a good start depending on pipes 155 mains and 48 pilots, you are good to go im running cel needles at about 1000ft Quote
252wheelieking Posted November 21, 2010 Author Report Posted November 21, 2010 you are controlling the fuel mixture if you have a hjr dune port this is a good start depending on pipes 155 mains and 48 pilots, you are good to go im running cel needles at about 1000ft I know im controlling the air/fuel mxture, I found out its the air im controlling on the PJ's.....im at sea level, T5's, K&N pods, HJR dune/play port with the temperture ranging from 40-70 degrees. I think I need a 50 pilot jet. The 48 pilot jet only idles good & have good throttle response at .5 turns out. When I use my 55 pilot it idles good & has good throttle response at 1.5 turns out but it too rich. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.