banshee vs lt500

[jaguar1331]

hey just wondering i have a 04 banshee and have some guy at work with a lt500 with a little over stock bore and basic bolt ons my bike is stock bore but ported and polishe and head is milled and timing is advanced jetted and piped what will it take to beat this guy

[Phelps]

bored out lt500 and bolt on's? your totally screwed!!!

[lt_ron]

Need more info

Is the zilla ported and by who what year motor does it have 87 or 88 and up and what pipe carb

What about your quad gearing pipes carbs

were are you guys going to be racing and how far

I have raced alot of different setup banshees with my zilla when I had pretty much stock motor to my alky motor with several different pipes so I should have a pretty decent ideal on the out come

If it has not been ported and has a fmf on it like most do you should wax it but it depends on his mods

[df350nos]

 

 

When mine was just a 350 I raced a few zillas. I had port work with head and 34mm carbs. and cpi. It was descent running little 350 and I had problems with lts. It would always come down to who got the hole shot on who would win.

[06specialedition]

just stop being a bitch and race him.

 

Race him and let us know how it goes

[1bad450r]

hey just wondering i have a 04 banshee and have some guy at work with a lt500 with a little over stock bore and basic bolt ons my bike is stock bore but ported and polishe and head is milled and timing is advanced jetted and piped what will it take to beat this guy

 

as long as your a decent rider and run on pavement you should have no problems walking away from him.