thrill-billy85 Posted November 9, 2010 Report Posted November 9, 2010 Okay when you pull the slide out and pull out the needle and look down inside the slide from the top, there is a hole that runs all the wal through. After you replace the needle and go to put the holder plate back on, it can be so it either DOES or DOES NOT cover that hole. The drawing in the clymer manual suggest that it DOES cover that hole. I cannot see a purpose to having that hole un-covered, but logic would suggest mikuni didn't put it there for no reason..... Question: HOLE THRU SLIDE.... Covered by the holder plate above the needle or not???? Any help would be awesome. You guys haven't let me down yet!! Quote
belly Posted November 9, 2010 Report Posted November 9, 2010 Okay when you pull the slide out and pull out the needle and look down inside the slide from the top, there is a hole that runs all the wal through. After you replace the needle and go to put the holder plate back on, it can be so it either DOES or DOES NOT cover that hole. The drawing in the clymer manual suggest that it DOES cover that hole. I cannot see a purpose to having that hole un-covered, but logic would suggest mikuni didn't put it there for no reason..... Question: HOLE THRU SLIDE.... Covered by the holder plate above the needle or not???? Any help would be awesome. You guys haven't let me down yet!! Are you talking about the plate with the two small screws that goes over the top to hold the needle in correct? I have mine with the hole open. It worked fine that way. Quote
thrill-billy85 Posted November 9, 2010 Author Report Posted November 9, 2010 Are you talking about the plate with the two small screws that goes over the top to hold the needle in correct? I have mine with the hole open. It worked fine that way. Yes that's what I'm talking about. The way they were was with the hole open, but the guy I bought it from fucked everything else he touched on the carb up, why not this right? Plus I could see an indentation on that plate from where it HAD blocked the hole Quote
belly Posted November 9, 2010 Report Posted November 9, 2010 Ya. I'm in the same boat as you with gettin something that's all messed up. It should work fine like that. Unless someone else jumps in and says otherwise. Quote
thrill-billy85 Posted November 9, 2010 Author Report Posted November 9, 2010 Ya. I'm in the same boat as you with gettin something that's all messed up. It should work fine like that. Unless someone else jumps in and says otherwise. Yeah it still runs.... Do me a favor please. I'm on my cell n can't use the shoutbox. Shot for AKheathen to check this post out please. Thx! Quote
belly Posted November 9, 2010 Report Posted November 9, 2010 Yeah it still runs.... Do me a favor please. I'm on my cell n can't use the shoutbox. Shot for AKheathen to check this post out please. Thx! sure. just did. Quote
AKheathen Posted November 9, 2010 Report Posted November 9, 2010 sure. just did. lol, i was putting my cover-alls/ppe on at that time for work.........slide relief hole open Quote
thrill-billy85 Posted November 9, 2010 Author Report Posted November 9, 2010 lol, i was putting my cover-alls/ppe on at that time for work.........slide relief hole open What, are you a roughneck? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.