Yamaha banshee 4mill all around quad

[340scamp]

This is a very nice 2003 banshee here is the link for more info and pics.

http://dayton.craigslist.org/rvs/2011169893.html

Edited October 17, 2010 by 340scamp

[2001blackshee]

This is a very nice 2003 banshee here is the link for more info and pics.

http://dayton.craigslist.org/rvs/2011169893.html

 

 

Thing seems to pull pretty damn hard!!! He will regret trading for a 450 if he does!!!

[SandmanPNW]

Thing seems to pull pretty damn hard!!! He will regret trading for a 450 if he does!!!

 

I thought Kevin didn't do worm holes? you sure he ported these cyls?

[340scamp]

I thought Kevin didn't do worm holes? you sure he ported these cyls?

When I purchased the cylinders they had a mild port job with worm holes then I sent them to kevin and he opened them up and moved them for my 4mill set up. They were ported for stock stroke when I got them. They out ran all of the stock stroke banshees that I raced even before I went to the 4mill set up. Thanks

[340scamp]

When I purchased the cylinders they had a mild port job with worm holes then I sent them to kevin and he opened them up and moved them for my 4mill set up. They were ported for stock stroke when I got them. They out ran all of the stock stroke banshees that I raced even before I went to the 4mill set up. Thanks

I am also going to have alot of banshee parts for sale if anyone needs anything. Thanks

[mysterion]

What parts do you have? I am looking for some shocks, anything but stock.

[340scamp]

What parts do you have? I am looking for some shocks, anything but stock.

All I have is stock shocks unless I part out my 4mill and I may do that next week or two if it does not sell. Thanks

Edited October 19, 2010 by 340scamp

[mysterion]

All I have is stock shocks unless I part out my 4mill and I may do that next week or two if it does not sell. Thanks

 

 

Ok PM me if you do part it out. Thanks!

[n0blefart]

All I have is stock shocks unless I part out my 4mill and I may do that next week or two if it does not sell. Thanks

If u part it out pm me a price on your cylinders and crank and head or your whole engine ill buy if price is reasonable.

[340scamp]

If u part it out pm me a price on your cylinders and crank and head or your whole engine ill buy if price is reasonable.

I would sell the whole engine with billet stator cover polished clutch cover vforce 3 reeds and billet intake for 2000 shipped in the lower 48 us states. This is not one of those engines that you have to wander what you might find wrong this is pefect. The cases are beautiful the cylinders are at 64.50 with 6 hours on the whole engine. Hot rods trued and welded crank billet timing plate new stator and rotor trans is perfect with a a ground shift star and new clutch. This engine has more low end then any banshee I have ridden and more top then most. It also has a billet kicker all new bearings and seals. Thanks

[n0blefart]

I would sell the whole engine with billet stator cover polished clutch cover vforce 3 reeds and billet intake for 2000 shipped in the lower 48 us states. This is not one of those engines that you have to wander what you might find wrong this is pefect. The cases are beautiful the cylinders are at 64.50 with 6 hours on the whole engine. Hot rods trued and welded crank billet timing plate new stator and rotor trans is perfect with a a ground shift star and new clutch. This engine has more low end then any banshee I have ridden and more top then most. It also has a billet kicker all new bearings and seals. Thanks

Yeah i got some stuff id take offs mine but was looking to upgrade to four mill anyways. Ill buy for 2000 shipped so if u decide to part it lemme know

[n0blefart]

I would sell the whole engine with billet stator cover polished clutch cover vforce 3 reeds and billet intake for 2000 shipped in the lower 48 us states. This is not one of those engines that you have to wander what you might find wrong this is pefect. The cases are beautiful the cylinders are at 64.50 with 6 hours on the whole engine. Hot rods trued and welded crank billet timing plate new stator and rotor trans is perfect with a a ground shift star and new clutch. This engine has more low end then any banshee I have ridden and more top then most. It also has a billet kicker all new bearings and seals. Thanks

Were are u located in ohio i could drive to keep anybody fro. Having to ship it im from southern mi. Matter of factly lemme know how much u want for carbs too so just the engine intake and carbs is all i really need. Thanks!

[lykins89shee]

I have rode this bike many times, and been spanked by it on the drag strip too. It has tons of low end and still has more top end than my stock stroke dune port. Who ever buys this bike or parts off it will not be disappointed.

[340scamp]

Were are u located in ohio i could drive to keep anybody fro. Having to ship it im from southern mi. Matter of factly lemme know how much u want for carbs too so just the engine intake and carbs is all i really need. Thanks!

In eaton ohio just east of richmond indiana and 20 mile west of I70 and 75. If you come and get it with the carbs cables and filters 2250. The carbs are brand new 35 air strikers with new cable and uni filters. Thanks 937 456 1540

[340scamp]

In eaton ohio just east of richmond indiana and 20 mile west of I70 and 75. If you come and get it with the carbs cables and filters 2250. The carbs are brand new 35 air strikers with new cable and uni filters. Thanks 937 456 1540 or 456 4848