andrew3160 Posted September 21, 2010 Report Posted September 21, 2010 Can anyone tell me how to get the ball joints out of the stock front suspension. I am assuming they press back in? And yes I know I should just upgrade, but I am going to hold off a bit and my frame is going to powder coat this week. Thanks in advance Quote
PACIFIC NW BANSHEE Posted September 21, 2010 Report Posted September 21, 2010 Can anyone tell me how to get the ball joints out of the stock front suspension. I am assuming they press back in? And yes I know I should just upgrade, but I am going to hold off a bit and my frame is going to powder coat this week. Thanks in advance good luck Quote
TeamRealtreeHD Posted September 21, 2010 Report Posted September 21, 2010 They are non-removable on the A Arms. You have to replace the Arm. A serious design flaw in the yamahas along with the chain adjustment system. Quote
NYUK Posted September 21, 2010 Report Posted September 21, 2010 i have 2+1 roll design. spindles tie rods and a arms. 250 and shipping. they need paint or powder. good time to upgrade. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.