BlackBeast Posted July 27, 2010 Report Share Posted July 27, 2010 Been out of the Banshee world for a few years, time to clean up the garage. Like the ad says, a complete RZ setup from a low-mileage bike. Includes carbs, electronics, wiring, PowerValve solenoid, and a set of Rocket Pipes (These are the only pipes made that will clear the Power Valves) I actually have the complete RZ bike, if anyone wants it. Needs to be put back together. Also a crap-load of spare parts... Clutch, V-Force Carbon Fiber Reeds, gaskets, spare transmission, etc... Take it all for $1500. Located in Colorado Springs. Might be able to deliver along the interstate between here and Chicago. Will post pics if anyone is interested. -Tim cell: 321-271-9520 Quote Link to comment Share on other sites More sharing options...
BlackBeast Posted July 27, 2010 Author Report Share Posted July 27, 2010 Don't have pics of the RZ frame, etc... But here is the motor. Quote Link to comment Share on other sites More sharing options...
BlackBeast Posted July 27, 2010 Author Report Share Posted July 27, 2010 And the pipes.... Someone stole the silencers (WTF???), but you should be able to use any set of silencers. Quote Link to comment Share on other sites More sharing options...
nastyracing Posted July 27, 2010 Report Share Posted July 27, 2010 And the pipes.... Someone stole the silencers (WTF???), but you should be able to use any set of silencers. does the motor run what type of compression does it have ect. Quote Link to comment Share on other sites More sharing options...
BlackBeast Posted July 27, 2010 Author Report Share Posted July 27, 2010 (edited) Yes, the motor was running when I removed it. Haven't fired it up in over a year, it's been sitting in my garage. I did drain the gas out of the carbs and plug the intake ports, so there shouldn't be any issues. I don't have a compression gauge, but will see if I can borrow one. The kickstarter feels like it has excellent compression, but I'll see if I can get some actual numbers for you. -Tim Edited July 27, 2010 by BlackBeast Quote Link to comment Share on other sites More sharing options...
BlackBeast Posted July 27, 2010 Author Report Share Posted July 27, 2010 No compression gauge, the local parts store didn't have one. I went ahead and pulled the head so you can see inside. Cylinder walls feel smooth, no noticeable scars. The cross-hatch is faded, but you can still see it in the pic. Quote Link to comment Share on other sites More sharing options...
BlackBeast Posted July 27, 2010 Author Report Share Posted July 27, 2010 Just added this stuff to eBay, at a much lower Buy-it-Now price. Here's the motor: RZ 350 Motor, eBay Here's the pipes: Rocket Pipes Thanks guys. -Tim Quote Link to comment Share on other sites More sharing options...
ELKARACING_SHEE Posted July 27, 2010 Report Share Posted July 27, 2010 haha, even the stock silencers fit on the rocket pipes, Dont ask me why, because i did it out of curiousity lol Quote Link to comment Share on other sites More sharing options...
BlackBeast Posted July 27, 2010 Author Report Share Posted July 27, 2010 Awesome, good info to know. I'll have to check and see if I have a set of stockers somewhere. Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted July 27, 2010 Report Share Posted July 27, 2010 I was actually looking at this on ebay alittle while ago. What are you missing to make a complete RZ? Quote Link to comment Share on other sites More sharing options...
BlackBeast Posted July 28, 2010 Author Report Share Posted July 28, 2010 For a complete RZ, just needs fairings, and pipes. I have all of the mechanical components. The gauge cluster is cracked, but not horrible. Seat could use refinishing, but if you get the Aerotech bodywork it comes with seat, lights, etc... I would take pics, but it's at my parent's house in Chicago. Will be heading out there in a few weeks, so I can bring it back with me or deliver somewhere along the way. -Tim Quote Link to comment Share on other sites More sharing options...
BlackBeast Posted July 28, 2010 Author Report Share Posted July 28, 2010 Forgot to mention, the tank and turn signals are pretty banged up too. Again, all of the mechanical parts are there, including the new frame, and appear to be in good shape. It mostly needs cosmetic work. -Tim Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.