2sTrokeLove Posted July 20, 2010 Report Posted July 20, 2010 got these cylinders off ALF they are drag ported for a 4mil long rod an i cant use them for my set up, i also have a spacer plate with them they need honed, will get pics, would like 300 obo shipped or trade for a set of stock stroke drag or dune ported cylinders. Quote
oreilys Posted July 20, 2010 Report Posted July 20, 2010 How are they drag ported for a 4mil but u use a spacer plate too Quote
oreilys Posted July 20, 2010 Report Posted July 20, 2010 How are they drag ported for a 4mil but u use a spacer plate too Quote
2sTrokeLove Posted July 20, 2010 Author Report Posted July 20, 2010 How are they drag ported for a 4mil but u use a spacer plate too idk ull have to ask alf they came with a spacer plate, an its a really thick plate. Quote
jasons Posted July 20, 2010 Report Posted July 20, 2010 from what i have been reading either you can use a 4mm thick spacer plate or use 4mil cut domes. i agree spec on the jugs need to be given maybe alf can chime in. any pics. Quote
alf44 Posted July 20, 2010 Report Posted July 20, 2010 I got these as a basket case motor and rolling chassis. All I know about them is there a drag ported and bored. I cleaned it up alot. I made the mistake off trading them off thinking he was building a 4mill, and me not realizing it until to late. My mistake completely. So im trying to help him get rid of these because he got a stock stroke crank for a great deal and now needs different cylinders. He was also told to run the stock crank with these cylinders??? Not my reccomendation!! They were done by someplace in Reno if Im not mistaken. It was along time ago when I got them. I do have a stock set to trade straight across if he doesnt sell or trade from another member here. Just giving the opportunity to someone he needs 4mill jugs. And yes you can use a spacer plate or have domes cut for a 4mill. Quote
sleeper06 Posted July 22, 2010 Report Posted July 22, 2010 Have someone run them on a degree wheel before you throw them to the side or take some measurements and contact me through pm,Ive seen people use spacers for stupid reasons Quote
4millshee Posted July 28, 2010 Report Posted July 28, 2010 ttt im interested i have a set of stock cylinders with i think a 66.5 bore ill have to measure and a dune port and i need a set of 4 mill cylinders beins im runnin stock clinders on a 4mill palte (i didnt buld it that way so no bashing lol) hints y im rebuilding it. what brand cylinders are they. feel free to call me my cell is 760-408-9817 lets make a deal i want them' thanks Jeremy Quote
2sTrokeLove Posted July 30, 2010 Author Report Posted July 30, 2010 got these 35mm mukunicarbs to need a offer not for sure wat to ask for them Quote
2sTrokeLove Posted July 30, 2010 Author Report Posted July 30, 2010 pic of the intake ill get better Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.