cheetah cub re- nikasil

[Alex29573]

hey guys, i blew up my topend and wanted to know if its possible to bore out my cylinders to 69mm or 70mm and then have them re-nikasiled??]

 

Or do i have to keep them at 68mm??

 

I'm thinking about using millenium for the plating? can anyone reccomend anyone else? how much does the plating cost?

[mailman]

Stick with the 68 mm bore. Use Millenium, they are the best. Cost is about 200 to 250 bucks.

[Alex29573]

why not 69 or 70 though?

 

at 70mm it would be a 446cc... kinda like a 7mil (443cc)

[mailman]

Here is a post about a similar question. I think Calvin would know best how big you can safely go. I hope this helps.

 

 

 

http://forums.atvdragracers.com/topic/8727-421-cheetah-question/

[DUMBASS]

Here is a post about a similar question. I think Calvin would know best how big you can safely go. I hope this helps.

 

 

 

http://forums.atvdragracers.com/topic/8727-421-cheetah-question/

i wouldnt send it anywhere but millenium. ive had 3 sets of cubs done by them. and it will be 300+ with shipping. as for boring it out. dont waste your time. just get it plated.

[Alex29573]

thanks guys