ItOnlyTakes2Strokes Posted July 4, 2010 Report Posted July 4, 2010 I wanted to get as much as i could out of what i had.... I had a set of ported stock reed cages, and figured they would work good on my stock cylinder drag Banshee... So, I got a set of Boyesen Pro Series Reeds.... Turns out they DO NOT work with ported reed cages... $90 reeds gone... Scarred cylinder wall... and extensive cleanup of reed breakage.... Won't do that again... Quote
DiSkOe*1 Posted July 5, 2010 Report Posted July 5, 2010 wonder what went wrong... as i ran them on my cub wit no issues and matt runs them on his too... cages over ported? DiSkOe*1 Quote
ItOnlyTakes2Strokes Posted July 5, 2010 Author Report Posted July 5, 2010 wonder what went wrong... as i ran them on my cub wit no issues and matt runs them on his too... cages over ported? DiSkOe*1 They are fully ported out... which after looking it over, that type of reed was a bad choice from the start.... They are so ported they dont even have the middle reed support... so the only option is to run full reeds with these cages... Quote
AWR Posted July 8, 2010 Report Posted July 8, 2010 great reeds-bad cages.nothing will last with no divider Quote
AKheathen Posted July 12, 2010 Report Posted July 12, 2010 first off- what the hell you doin payin $90 for $60 reeds? but really, those cages should have been installed where they belong- the trash. even with the stiffest solid pedal, it would still flex in the middle and loose power at the minimum. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.