keeks707 Posted June 22, 2010 Report Posted June 22, 2010 Install some new PWK 35's yesterday but i had to change the throttle cable from my old stock carbs to the 35's. After intalling i try to start the banshee, luckily it started but then i noticed gas coming out of the left carb through the lower hose! Whats going on???? Quote
hercalmighty Posted June 22, 2010 Report Posted June 22, 2010 Make sure your float isn't sticking and that the little screw by the lower hose is screwed all the way in Quote
keeks707 Posted June 23, 2010 Author Report Posted June 23, 2010 Make sure your float isn't sticking and that the little screw by the lower hose is screwed all the way in im a newb to carberators! does anyone have a diagram or can explain a little more? Quote
hercalmighty Posted June 23, 2010 Report Posted June 23, 2010 Easy thing to do is take a screw driver handle and tap the side of the bowl. If the carb stops leaking the float is sticking. Take the bowl off and check everything out to see if there is anything that could hang the float up. Quote
keeks707 Posted June 24, 2010 Author Report Posted June 24, 2010 Easy thing to do is take a screw driver handle and tap the side of the bowl. If the carb stops leaking the float is sticking. Take the bowl off and check everything out to see if there is anything that could hang the float up. I took the bowls off and messed with it ..installed the bowl back, put the carb bac, and turn on the fuel , and no LEAKING!!! YES!!!!! Quote
moneybags Posted June 24, 2010 Report Posted June 24, 2010 You can also pick up the back or the quad with the grab bar and drop it. Be careful starting the bike after the float sticks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.