Infamous039 Posted June 20, 2010 Report Posted June 20, 2010 Hey guys I am looking to pick up some Uni-Pod filters for my Keihin 28mm PWK carbs. Can someone please give me the size of the pods that I need to order????? I need to know the diameter and length sizes????? Quote
mercury65 Posted June 20, 2010 Report Posted June 20, 2010 2 inch is what fits the stock 26mm so i would say 2" and my 33 pwk's take 2 1/4 as far as lenth that depends on if your going uni or k&N Quote
Infamous039 Posted June 20, 2010 Author Report Posted June 20, 2010 Im goin with Uni stage two pods ??? Quote
SAVAGE420 Posted June 20, 2010 Report Posted June 20, 2010 The Inside diameter on the pods where they will clamp onto the carbs will be need to be 49mm (1.9") they fit perfectly. The straight 4" long ones will be more then fine for what you have. But if you insist on having the 6" long ones then you will probably need the angled 15° ones so they don't hit on your stingers. 4" straight ones. Part# UP4200ST 6" 15° angled ones. Part# UP6200AST There in this list, scroll down a bit. http://www.unifilter.com/online%20catalog/universal.html Quote
Infamous039 Posted June 20, 2010 Author Report Posted June 20, 2010 Thanks, Savage you the man The Inside diameter on the pods where they will clamp onto the carbs will be need to be 49mm (1.9") they fit perfectly. The straight 4" long ones will be more then fine for what you have. But if you insist on having the 6" long ones then you will probably need the angled 15° ones so they don't hit on your stingers. 4" straight ones. Part# UP4200ST 6" 15° angled ones. Part# UP6200AST There in this list, scroll down a bit. http://www.unifilter.com/online%20catalog/universal.html Quote
mercury65 Posted June 20, 2010 Report Posted June 20, 2010 Hey guys I am looking to pick up some Uni-Pod filters for my Keihin 28mm PWK carbs. Can someone please give me the size of the pods that I need to order????? I need to know the diameter and length sizes????? sorry it was late didnt catch the uni in your post but you might want to think about cutting off the tabs that hold the stock airbox the will wear holes in your pods. Quote
alf44 Posted June 20, 2010 Report Posted June 20, 2010 Hit me up man. I can orders these for you and save you the shipping. PM me. Quote
wannashee20 Posted June 22, 2010 Report Posted June 22, 2010 If I were you i would definately go with the 6 inch pods, the 4 inchers will work but are not ideal. i tried the 4 inch k&n pods with 28's but it didnt work out so well, had to clean them after just a couple hours of riding and the shee did not perform the best, it was always begging for air. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.