onefstcat Posted June 17, 2010 Report Posted June 17, 2010 Ok I have a oil leak and I think it's the push lever. It comes up about a half inch I was told there was a metal stoper on it the only thing I can find is a keeper that looks like it lays over top??? Mine is missing.Yamaha part # 90462-16130-00 I attached a link the part is #26 is that the part that holds the push lever down?? Or is there something inside that holds the push lever from poping up? I don't leak oil when it's down. http://www.boats.net/parts/search/Yamaha/All%20Terrain%20Vehicle/1999/YFZ350L%20-%20BANSHEE/CRANKCASE/parts.html Quote
68chevyc10355 Posted June 17, 2010 Report Posted June 17, 2010 Yes you need part #26. It holds the downshaft in place. Make sure that when you put this "keeper" on that it doesnt push down too hard on the downshaft. This will not allow the spring to return the downshaft to its original position and it could remain in contact with the pushrod which is being pushed on by the clutches. This contact could cause the pushrod and downshaft to heat up, the pushrod will mushroom, the downshaft will wear, and the pushrod could slide past the downshaft. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.