engine coolant

[Jaystre]

how much coolant goes into a banshee ? i have a bigger radiator

[SAVAGE420]

Fill it up until its full.

Put the cap on.

Start it, let it idle for a minute.

Then top it up.

[GrMeyer]

I think it is right around 1/4th - 1/3 of a gal.

[Jaystre]

Fill it up until its full.

Put the cap on.

Start it, let it idle for a minute.

Then top it up.

dont u have to leave the cap off to let any air bubles out while idling

[GrMeyer]

I leave the cap off and keep top'n it off. I also pick the front end up and back end up and drop them. Just to help move any air. After that it should be good. Just take it down the street and come back and let it sit for about 5 mins. Take cap off and top it back off. Then ride the piss out of it!

[Jaystre]

ok thx

[AKheathen]

lol, the banshee is designed so that the head and top of the radiator is the only place to hold air, so the head is vented by that tiny hose. just fill it, shake it side to side a couple times, and put the cap on. fill the rezivoir if you have it, to the proper line and go ride. any air will purge there, and if you don't use a rez. then there will always be a small amount of air in there.