What jet kit setup do I need

[shakenbake1285]

1500 ft above sea level, toomey t6 exhaust, uni air filter and the tors r removed. Right now my bike will not idle and the bottom end has some miss in it n backfire is that because of stock jets n needles

[shakenbake1285]

And also who makes best jetkit and fastest place to get them delievered

[bansheesandrider]

Didn't your T6s come with a jet kit? I thought all Toomey pipes came with a Toomey jet kit. Did whoever you got the pipes from not supply it?

[shakenbake1285]

I got the pipes off a buddy he has jets n stuff on his bike

[fastbanshee8]

Ask your buddy what jets came with the pipes, and go buy them, along with several sizes larger, and smaller. The jet kits are overpriced, and don't always have the sizes you need.

[shakar]

if u got stockers theres a dude on ebay that has a decent kit for like 30 shipped

[shakenbake1285]

Yea I got all stock carbs. The bike will idle if I choke it. Is that from not being jetted (I tried the idle screws with no luck)

[shakar]

http://www.toomey.com/ and go to documents then t=6 instalation /jeting directions ......... might help?? Edited May 20, 2010 by shakar

[SNTBANSHEE]

Yea I got all stock carbs. The bike will idle if I choke it. Is that from not being jetted (I tried the idle screws with no luck)

 

Yeah ,when you pull the choke you are making the mix richer which means you are lean right now. You need to jet up. Check the pipe manufacturer's jetting recommendations and go from there.

[shakenbake1285]

Thanks

[shakenbake1285]

Do I have to buy new jets or can I adjust the stock ones n make them work ( if so what do I need to do)

[fastbanshee8]

You have to buy the needed jets. There's no adjustments on the jets, only the idle screws, and the air mixture screws.