Piston question!

[vbanshee]

i do not know what size my pistons are on my banshee... im putting new rings on it and i dont know the size they are weisco piston on top of it theres a serial number and alsot says 3855J.... is it bored to a 385?

[pweezy42]

there should be more #'s than that on the top of the piston you need the end numbers to check

[vbanshee]

there should be more #'s than that on the top of the piston you need the end numbers to check

 

there was a serial number on it as well

[J-Madd]

If it is wiseco there should be a series of letters and numbers. The last few numbers indicate the bore size. For example .........6650 would be a 66.5 mm bore; .............6675 would be a 66.75 mm bore. Just making these figures up; but you get the point.

[vbanshee]

If it is wiseco there should be a series of letters and numbers. The last few numbers indicate the bore size. For example .........6650 would be a 66.5 mm bore; .............6675 would be a 66.75 mm bore. Just making these figures up; but you get the point.

 

thanks man great help!