pivot work swing arm bearings?

[VictorK]

I bought pivot works swing arm bearings and the rubber seals won't stay inside the covers,did anyone have this problem?

[VictorK]

I think I might pull them off and super glue them in the caps seeing as I've worked them back in the caps twice only to see them bitches come back out!

[bansheesandrider]

When I used a Pivot Works kit on my kid's Blaster swingarm I couldnot even get the sleeves to go in the new bearings. I ended up reusing the old sleeves and caps which were still in good shape, I had bought and extended swingarm from Cascade and the bearings were junk, luckily I kept the original sleeves and caps when I traded in her stock arm. My opinion of Pivot Works stuff is it is junk.

[VictorK]

When I used a Pivot Works kit on my kid's Blaster swingarm I couldnot even get the sleeves to go in the new bearings. I ended up reusing the old sleeves and caps which were still in good shape, I had bought and extended swingarm from Cascade and the bearings were junk, luckily I kept the original sleeves and caps when I traded in her stock arm. My opinion of Pivot Works stuff is it is junk.

my sleeve didnt go in easy either,I was able to get it through both bearings but it was pretty tight IMO