COMPLETE PART OUT

[dmfisher71]

i have a 1994 Banshee with a 1987 motor and wire harness i am going to part out. let me know what you want if it is not listed here i am just listing the big parts right now

 

A-arm frame w/arms and swing arm $600

 

complete motor (runs but hard to start needs rings)

on 66.5 mm bore currently has wiseco pro-lite pistons, pro design cool head, hot rods stock stroke crank, stock reed cages w/ fmf reeds, and reed spacers, has kicker and shifter on it, and white brothers boost bottle. $1100

 

stock carbs w/ TORS removed and brand new throttle cable (on the left carb on the cap where the cable goes in is broke but it is there) $100

 

FMF gold series pipes w/FMF silencers pipes are in ok condition right side has a small spit in the seem on the bottom right now but i will pull it off and have it welded just noticed it today silencer inlet pipes are a bit rusty as well as the end caps but the canisters look good $150

 

Stock plastic complete front and rear fenders radiator cover and tank cover (somewhat faded but not bad, has one small piece brokes off on the left side lower fender where the fender support bolts to fender $125

 

seat good foam with brand new black gripper seat cover $65

 

brand new front bumper have not even put on bike yet bought off ebay last week $60

 

stock steering stem with stock bars $60

 

gold front rims stockers w/tires tires have maybe one more summer left MAYBE $60

 

Douglas 10" rear rims NON ROLLED BEAD w/ turf tamers quite a bit of tread left BUT i can get one tire bead to set not sure if tires are good or not $75

 

stock rear axle painted black/ brushed nickel like a barber shop poll $50

 

complete rear brake assembly (pedal, master cylinder, all lines, and caliper) $125

 

complete front brake assembly (master cylinder, lever(bent), all lines, and calipers) $100 will not gaurantee how the metal lines will survive

 

Front shocks (stock) w/ brand new covers $75

 

Rear shock (stock) w/ brand new cover $75

 

air box w/ like new uni filter $25

 

BRAND new PRM skid belly skid plate $125 never mounted

 

I DO NOT HAVE PICS YET I WILL GET THEM AS BEST I CAN (camera is dead) as soon as i can so please be patient

 

quad is for the most part still together parts will be pulled upon payment

 

if there is something i have not listed here that you want PLEASE feel free to email me or PM me.

 

ALL THE PRICES ARE OR BEST OFFER AND + SHIPPING FROM BROWNSTOWN, IN 47220

 

PLEASE PLEASE PLEASE either email me or PM me i will only check this thread to update on what is sold and with a link to pictures

[dmfisher71]

my email address is [email protected]

 

i prefer to only ship to the U.S. 48 states

[run]

Pics of seat w/ gripper cover please...

[dmfisher71]

Pics of seat w/ gripper cover please...

 

 

i took several pics of the quad i will get them uploaded to photo bucket later on tonight (my mac wont upload pics to this site for some reason) i will get them up after my kids go to bed after while

[dmfisher71]

ok here is a link to the pictures of the banshee i am parting out hope it works

 

 

http://s919.photobucket.com/albums/ad31/dmfisher71/

[dmfisher71]

bump, bump, bump make me some offers need it gone

[So Cal Suspension]

bump, bump, bump make me some offers need it gone

 

What kind of condition are your sprockets in? also tooth count for front and rear? I'm looking to play around with some sprocket combo's, but don't want to spend the money on new ones until I find the combo I like.

[sitdownbrad]

interested in the rear brake assembly. dont need the line but the master cylinder, caliper and linkage for the master cylinder. pretty much everything except the brake line itself

[FATBANSHEE]

received my parts today...

thanks for the good deal.

Chris

[kanoodle]

How much for rear axle, axle carrier, and brake assembly shipped to 84120...

 

~Dustin

[alf44]

Rear shock? how much?

 

OOPS. nevermind i found it in your list. Ill give you $50 shipped. pm me if you will take it. thanks.

[dmfisher71]

I DO APOLOGIZE FOR THIS I DID NOT KNOW HOW ELSE TO DO THIS BUT THESE PARTS ARE NO LONGER FOR SALE AT THIS TIME. SORRY.

i am going to try to sell it complete if it doesnt sell i will redo a different post with different prices and better pics.

and please keep any negative feedback to yourself.

[So Cal Suspension]

I DO APOLOGIZE FOR THIS I DID NOT KNOW HOW ELSE TO DO THIS BUT THESE PARTS ARE NO LONGER FOR SALE AT THIS TIME. SORRY.

i am going to try to sell it complete if it doesnt sell i will redo a different post with different prices and better pics.

and please keep any negative feedback to yourself.

 

I figured you were going to sell any of the stuff... 4 days and no reply. No biggie. Moving on!