9banshee6 Posted March 19, 2010 Report Share Posted March 19, 2010 how do i move my needles from positions ? how many positions is there? how do i know what position there in Now? Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted March 19, 2010 Report Share Posted March 19, 2010 I assume you have the stock carbs. Undo your carb caps, pull up and the slides will come out and you will see most of the needle. Unhook the throttle cable (you will see how) and then be very careful and push the needle up and out where the cable was( dont bend it). Then theres a lil clip on the needle with some notches (will look like these pics>>>) http://www.iwt.com.au/images/needle.gif ........ http://crfsonly.com/howto/450x/jetting/needle-clip-1.jpg Then depending on what you want to do (go leaner or richer on the needle) you move that lil clip up or down in those notches. To go leaner, you move the clip UP dropping the needle Down. To go richer you you move the clip Down in the notches to bring the needle up and so on. You can also read this a couple times http://www.dfn.com/benkaren/jetfaq.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.