Modified RC Posted March 18, 2010 Report Posted March 18, 2010 I have a question about the wires coming out of the light control and engine off switch on the handlebars. I have everything hooked up just like the wiring diagram of the Banshee manual shows, except for the yellow wire with a red stripe. The manual doesn't even show a yellow/red wire, only solid yellow. Can anyone tell me where the yellow wire with red stripe connects to? Thanks for any help you can provide. Quote
Snopczynski Posted March 18, 2010 Report Posted March 18, 2010 thats the power feed to the switch. It plugs into the stator. Quote
Modified RC Posted March 18, 2010 Author Report Posted March 18, 2010 thats the power feed to the switch. It plugs into the stator. Thank you, so it plugs into the yellow wire off the stator? Quote
Snopczynski Posted March 18, 2010 Report Posted March 18, 2010 if your talking about the male bullet connector on the harness by a black bullet connector, then yes. Quote
Robinsonye65 Posted March 19, 2010 Report Posted March 19, 2010 Hi to all this is Whitey i from DE i just join this forum today.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.