CadillacBanshee Posted March 10, 2010 Report Share Posted March 10, 2010 i got the information to install when i purchased the mod last year, but i lost it all and i dont remember. Can anyone help? Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted March 10, 2010 Report Share Posted March 10, 2010 Vitos or Cascade style? Anyways its pretty easy to install and you don't need to remove the clutch plates. Pull the clutch cover, remove the pressure plate spring bolts, remove the old adjuster from the pressure plate, stick the pancake bearing in between the pressure plate and the inner hub, put it all back together and you are done. After you put the springs back on, make sure you use the adjuster on the pancake bearing to alight the shift actuator with the arrow on the case, but sometimes if your cable is stretched it might not line up so go by how it feels. Also check your ball and rod to make sure they are in decent condition. The pancake bearing is cheap insurance to make sure they don't get welded together. Quote Link to comment Share on other sites More sharing options...
CadillacBanshee Posted March 11, 2010 Author Report Share Posted March 11, 2010 I will try that tonight, its insurance i should have bought when i first bought my bike. My rod and ball have already been welded together once. Sounds simple, i just didnt want to mess anything up. thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.