jetting banshee help 28mm pwk

[nastyracing]

I need somewhere to start on my jetting main size pilot sive n clip position. Its 65.5 mm stage 3 port work 18 cc domes no air box lid knn filter lrd adjustable pipes timing advanced 4 degree LRD custom needs in the carbs. I live in NJ. No idea of altitude round here any help apreciated.

[nastyracing]

Forgot to add delta v force 2 reeds

I need somewhere to start on my jetting main size pilot sive n clip position. Its 65.5 mm stage 3 port work 18 cc domes no air box lid knn filter lrd adjustable pipes timing advanced 4 degree LRD custom needs in the carbs. I live in NJ. No idea of altitude round here any help apreciated.

[volcrano]

Forgot to add delta v force 2 reeds

for these temps right now id go 160 main and 50 pilot,1 1/2 turns out,needle in middle.n68a needles are the best for these carbs.

[nastyracing]

Who sells thoes needles. And where r u located round this area?

for these temps right now id go 160 main and 50 pilot,1 1/2 turns out,needle in middle.n68a needles are the best for these carbs.