4mil stock cylinders

[ryderz]

im currently building a 4mil stock cylinder bike i have a few questions,what i doing is 4mill stock cylinder, 33 keihen carbs, lightend fly wheel,shift star and shifter,pancake bearing,adjustable timing,t-5 toomeys,super light pistons,aftermarket head,billet intake ,vforce 3 reeds,4 inch swinger,my questions are preffered jetting and needle,timing degree,clutches,gearing,and what domes to run in head? this is just a duner or little hill shooting will be running race fuel any help would be great didnt want to post in multible forums thx

[tundish2800]

I run vito's clutch,+4 timing. For domes i would say like 18 or 17cc domes for race gas depending on elevation And would start out with stock gear till you get a feel for what you want. I have a stock cylinder 4mil. and ran almost that same setup last year

[alf44]

Im going to be running 19cc custom cut domes with mine. Either the superlights or blaster pistons. with 110 octane.

[ryderz]

I run vito's clutch,+4 timing. For domes i would say like 18 or 17cc domes for race gas depending on elevation And would start out with stock gear till you get a feel for what you want. I have a stock cylinder 4mil. and ran almost that same setup last year

thx for the info with that setup over stock did u feel a big diffrence?