shee2000 Posted February 24, 2010 Report Posted February 24, 2010 this is what i got . a 01 shee with fmf fatties ,k&n,timing plate at +4. what should i do next. and i got a set of 21x12x8 skat trac haulers is this to much paddle for my shee? Quote
Burt Reynolds Posted February 24, 2010 Report Posted February 24, 2010 If you wanna spend some money,i would get some porting done,if you want to spend a little get your head milled Quote
shee2000 Posted February 24, 2010 Author Report Posted February 24, 2010 If you wanna spend some money,i would get some porting done,if you want to spend a little get your head milled what about a head from chariot performance and also what about reeds and cages Quote
bbcmudtruck Posted February 24, 2010 Report Posted February 24, 2010 A shaved head or a cool head would be a nice addition to your bike. What do you have for suspension? Quote
shee2000 Posted February 24, 2010 Author Report Posted February 24, 2010 A shaved head or a cool head would be a nice addition to your bike. What do you have for suspension? just stock,thinking of a +4 swinger and some shocks front and rear eventually im a bigger guy so im not sure on the swinger so im gonna wait till i can get out to silverlake and ride for that decision Quote
GrMeyer Posted February 25, 2010 Report Posted February 25, 2010 I would wait tell you get more power before you get a swinger. The 8 paddles work great on my stock bike when I had no porting. Shit im still running them and they seem to work just fine. But when I launch the bike, they sit for a few secs before they start to hook up. But like everyone said, go with a head mod. I got the Noss cool head because I didnt have to change out the head studs like the cool head did. I also got it because then I can change up my compression from dune season to trail. If you ride the dunes and trail with no water or mud. I would look at getting some pod filters if you dont have them. Doing a suspension really helped out the old school stock banshee. Just adding +2+1 arms, yfz 450 shocks and a +4 axle out back really made the bike feel like its on rail in the dunes. You can only ride so long tell you feel like someone hit you with a truck. One more would not be for performance but easier to jet would be the TORS kit. Other then that, you would have to pull the jugs to do more work. But having the jugs ported was a massive improvement for the money. Money well spend in my book!!! Also, read up on this site to help you understand the jetting of the banshee http://www.dfn.com/benkaren/jetfaq.html Quote
shee2000 Posted February 25, 2010 Author Report Posted February 25, 2010 I would wait tell you get more power before you get a swinger. The 8 paddles work great on my stock bike when I had no porting. Shit im still running them and they seem to work just fine. But when I launch the bike, they sit for a few secs before they start to hook up. But like everyone said, go with a head mod. I got the Noss cool head because I didnt have to change out the head studs like the cool head did. I also got it because then I can change up my compression from dune season to trail. If you ride the dunes and trail with no water or mud. I would look at getting some pod filters if you dont have them. Doing a suspension really helped out the old school stock banshee. Just adding +2+1 arms, yfz 450 shocks and a +4 axle out back really made the bike feel like its on rail in the dunes. You can only ride so long tell you feel like someone hit you with a truck. One more would not be for performance but easier to jet would be the TORS kit. Other then that, you would have to pull the jugs to do more work. But having the jugs ported was a massive improvement for the money. Money well spend in my book!!! Also, read up on this site to help you understand the jetting of the banshee http://www.dfn.com/benkaren/jetfaq.html i think i will do the head mod and get some pods, what about reeds and cages i was thinking of the ones from chariot performance any good? Quote
GrMeyer Posted February 25, 2010 Report Posted February 25, 2010 All I did was mod the stock ones and put some boyesen reeds. Quote
shee2000 Posted February 25, 2010 Author Report Posted February 25, 2010 All I did was mod the stock ones and put some boyesen reeds. well i just ordered the tors kit and were is a good place to get the pods and outer wears at? Quote
GrMeyer Posted February 25, 2010 Report Posted February 25, 2010 try the site sponsors first. Then try the for sale. Then ebay. But the sponsors should be able to hook you up with what you need. Quote
shee2000 Posted February 27, 2010 Author Report Posted February 27, 2010 try the site sponsors first. Then try the for sale. Then ebay. But the sponsors should be able to hook you up with what you need. thanks i appriaciate all the info Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.