jmoore Posted February 4, 2010 Report Share Posted February 4, 2010 I have been wanting to do this for a while now. I was looking through my clymers last night and it appears that the clutch needs to come out? I haven't even had the clutch cover off on my banshee yet since iv'e had it (bought it new) so I don't want to dive into all that if that's the case. Can someone please give me a quick process on that mod.? Quote Link to comment Share on other sites More sharing options...
TwistedSheeRida Posted February 4, 2010 Report Share Posted February 4, 2010 Your gonna have to remove the cover and the internals in there like the clutch kickstarter and a few gears. You dont have to take the clutch apart just remove the 6 clutch springs and then the center nut, slide off the whole clutch assembly. Its really quite simple. If you dont have a hand impact driver than you should go get one cuz your prob gonna need it. Quote Link to comment Share on other sites More sharing options...
jmoore Posted February 4, 2010 Author Report Share Posted February 4, 2010 Ok thanks for the quick reply. That's the info I was looking for. Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted February 4, 2010 Report Share Posted February 4, 2010 If your going to pull it apart, you should mod your shift shaft as well. Quote Link to comment Share on other sites More sharing options...
robert0762 Posted February 4, 2010 Report Share Posted February 4, 2010 If your going to pull it apart, you should mod your shift shaft as well. What is done when moding the shift shaft Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.