smoke on one side please help

[rudy2191]

hi everyone,

i have a little problem with my banshee

it was runing fine until yesterday that i notice the smoke comes out more from the right side exhaust,

pretty much its not even, at times you cant see smoke coming out from the left side,

i put my hand at the end of exhaust and it seems like the right one has more pressue than the left,

just wondering what it was, both pistons have ggod compression

can it be a spark plug,?

thankyou

[So Cal Suspension]

hi everyone,

i have a little problem with my banshee

it was runing fine until yesterday that i notice the smoke comes out more from the right side exhaust,

pretty much its not even, at times you cant see smoke coming out from the left side,

i put my hand at the end of exhaust and it seems like the right one has more pressue than the left,

just wondering what it was, both pistons have ggod compression

can it be a spark plug,?

thankyou

 

 

Drop one of these in the tank... maybe two, every time it smokes, then gradually taper off.

 

 

In all seriousness, try cleaning the carbs, and make sure they are synced. Does it have any issues running/idling?

[rudy2191]

Drop one of these in the tank... maybe two, every time it smokes, then gradually taper off.

 

 

In all seriousness, try cleaning the carbs, and make sure they are synced. Does it have any issues running/idling?

 

 

pretty funny, lol

 

yea i cleaned out the carb good, the jets are fine it wasnt dirty a bit, and i went ahead and bought new spark plugs already,

although i just notice that my idle screw from the left carb is missing, i removed the tors already and purcahsed a kit, and the idle screw is gone,

it idles okay, but can that be the problem??

, regardless i already order a new set of idle screws, because i still need it

and also when i rev it, smoke does come out, sometimes even sometimes less than the right

thanks for the help

[SandmanPNW]

In all seriousness, try cleaning the carbs, and make sure they are synced. Does it have any issues running/idling?

 

Sounds like you need to synch ur carbs. Just pull the air filter(or pods) off and look at the slides. see how they sit just as they are. Mess with the adj. screws on the carb tops to line them up. give it a little throttle to barely raise the slides up and see if they move evenly and together. Should fix the problem. you might have to adjust the throttle cable on the throttle body too. Make sure the slides go all the way up and at the same time should fix ya up. Anyone else got any ideas do chime in. Hope this helps