rascal Posted January 1, 2010 Report Posted January 1, 2010 hey guys, i wana take my vitos motor to the next level here. it has a vitos 4mill crank and bored to65mm . it has the vitos super stock forged pistons in it with the billet timing at 4 degrees .also put some billet intakes on it with v force 3 reeds. carbs are stock now with 340 main and 30 pilots and needles raised the whole way up.the pipes are the fmf fatty with power core 2 . Im thinking 68 mm bore with wisco pistons. can i get my cylinders bored that far .im probly gonna be in the market for 35 air strikers also so im gonna unload a bunch of my other stuff . im wanting to go with the 420 engine set up. Quote
sheerider1026 Posted January 1, 2010 Report Posted January 1, 2010 since you already have a 4mm crank, why not look around for a 421 cub cylinder?? sounds like you are wanting to go fast.. Quote
rascal Posted January 1, 2010 Author Report Posted January 1, 2010 since you already have a 4mm crank, why not look around for a 421 cub cylinder?? sounds like you are wanting to go fast.. its fast now but im too used to it !! i want more !! im a big guy and love arm rippind power!! im currently looking at the option of the cheetah cub cylinders ! i wanted to know if i could bore the stock jugs that far. i have two sets of them . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.