so what pistons 2 use?

[banshee_terror_]

i went to put my motor together a 4mill stroker with std pistons and yah they dont work... is there only 795 seriese pistons or any other kind i can get? thankx

[Bansh-eman]

It depends on what the rod length is as to which piston your going to need. You will also need to have a coolhead with the proper domes cut for a 4mil or get your stocker cut to takeup the 2mm of extra piston travel.

 

If you got a long rod and you want to go with Weisco you will need the 795 Series Pistons in what ever bore your at. WSM is another great piston to use. Both have differant tolerances so don't just assume your good by slapping them in there. Get the piston and send your jugs to a reputable place to have matched.

[banshee_terror_]

idk if its a long rod or not. i bought the crank as a hotrods 4mill. i put it in with std pistons and when it rose the top ring came out the cylinder, it rose that high.. i have the pd head with 200cc 4mill cut domes. im not a noob if thats what your thinking. its just idk what pistons to use really 795's or not...

[AKheathen]

NOOB!......

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

haha, j/k.....it takes at least 5mm to pop the rings out usually, so, yah, you have a long rod stroker.......i'm going wsm, since they offer both longrod, but coated as well. wsm only has .5mm size options, though....

[banshee_terror_]

 

haha, j/k.....it takes at least 5mm to pop the rings out usually, so, yah, you have a long rod stroker.......i'm going wsm, since they offer both longrod, but coated as well. wsm only has .5mm size options, though....

 

 

yah its a long rod i just asked the guy i bought it off of...thankx ak i didnt know wsm made them so ill look