Jump to content

Recommended Posts

Posted

while on my way to Glamis from san diego my banshee leaks oil, and on the way back what could be causing this problem anyone??

 

and i got a light problem one of my trail tech lights always burns out after one ride ,why??

 

Ok... Where is the oil coming from? is it coming out of the vent tube, a gasket or off the truck??? How is the bike sitting when it is in tow?

Just some small questions that might help.

 

The light sounds like a wiring problem. I would check and make sure you ground is good.

Posted

You might have a bad voltage regulator. With the engine running at more than 1/2 throttle, check the voltage to the lights. I don't remember the spec, but it is around 14.5 volts. If it is higher than spec you could have a bad regulator, or possibly a bad ground for the regulator.

Posted

i believe the banshee goes as high as 16v....have to check on that one. also, check the rear vent tube fitting, @ the rear motor mount. it may have poped out. found out on that one, because i load by walking it on the grab bar

Posted

For the light...Tail Tech is know'n for their the bad Ballest... I have sent mine in for three different ones.. Im on my Gen 4th what the tec said. My brother just sent his back in about a month ago and they have upgraded again to Gen 5. So call tail tech and see whats up... if your the owner from the get go then your good. If not you need to find the first owner of the lights and have him send them in. Each year with them at the dunes they end up going out due to high vibration. So I have learned when doing night rides to take one of those cheap head lamps from walmart with the three LED white light and two red to be in my pack. So no matter what I have some kind of light. So your not the only one seen probs with Trail Tech lights.

Posted

Ok... Where is the oil coming from? is it coming out of the vent tube, a gasket or off the truck??? How is the bike sitting when it is in tow?

Just some small questions that might help.

 

The light sounds like a wiring problem. I would check and make sure you ground is good.

 

i think the oil is coming from the back of the motor. i have my bike sitting flat i never stand it up. could it be elevation change???

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...