blowit Posted November 19, 2009 Report Posted November 19, 2009 1.30mm Is there something wrong with that number? That is in the ball park and surely would not cause your extreme bog. Depending on setup, it could be tuned a bit but that is not bad. B Quote
stroking Posted November 21, 2009 Report Posted November 21, 2009 if its a 1.30" then thats your problem i had one that was 1.10" and it was bogging REALLY BAD. Quote
blowit Posted November 21, 2009 Report Posted November 21, 2009 if its a 1.30" then thats your problem i had one that was 1.10" and it was bogging REALLY BAD. He mentions that it is 1.30mm which is .051". That is a decent number for most builds. Nothing wrong with that. Quote
toolucky Posted November 23, 2009 Author Report Posted November 23, 2009 He mentions that it is 1.30mm which is .051". That is a decent number for most builds. Nothing wrong with that. My fault, that measurement was the thickness of the solder before the test. I had to fold it over and melt it together then do the test and it was .060" sorry for the mix up Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.