Artv Posted October 18, 2009 Report Posted October 18, 2009 Hey guys, when the bike is put in gear the bike will not move, no matter what gear the bike is in it will not move. I can move the gears up and down but the thing wont go. It is a 2002 banshee. Any help would be helpful. Quote
superfastyfz450driver Posted October 18, 2009 Report Posted October 18, 2009 possible burnt out clutch Quote
278 Posted October 18, 2009 Report Posted October 18, 2009 check to see if the pressure plate on the clutch is on right, theres 6 ways it will go on and only one of them works, I had the same problem until i was told this Quote
shadow746 Posted October 18, 2009 Report Posted October 18, 2009 Im almost positive its your clutch. I had the same problem and i just put new friction plates in and it fixed the problem Quote
Artv Posted October 18, 2009 Author Report Posted October 18, 2009 Im almost positive its your clutch. I had the same problem and i just put new friction plates in and it fixed the problem Is this a cheap fix??? I just picked up the bike yesterday. im some what mechanicly inclined. Quote
shadow746 Posted October 18, 2009 Report Posted October 18, 2009 I got the whole package from the yamaha dealer for like 100$. But it might be cheaper then that. Quote
Screaming Yellow Zonker Posted October 18, 2009 Report Posted October 18, 2009 Sounds like clutches. After you get the side cover off it is a piece of cake to change. Call up Jeff at F.A.S.T. and order one of these... http://farmandsandtoys.com/partdetail.asp?partid=34 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.