sweeper350 Posted October 11, 2009 Report Posted October 11, 2009 my stupid brother and law put the wrong oil gas ratio in my banshee when i was out of town.. no luck in syphoning it out.. i got everything off disconnected the tank... but i cant figure out how to get the hoses disconnected.. any help on what i gotta do is gladly appreciated Quote
White97Banshee Posted October 11, 2009 Report Posted October 11, 2009 There's this hose coming out of the filler cap. That's called the vent line. Pull it through the hole on the handlebar clamp. NOW you're gonna wanna make sure you turn the petcock off (that's the little dial that says on/off/res). And now you're ready to pull the hose off the petcock that is connected to the carburetor. There is usually a little clamp on the hose and you're gonna wanna take that off by any means you see fit. Now keep in mind you might have to pull hard to get the hose off the petcock. Next you're ready to unbolt it from the frame. There are 4 bolts. One in each corner of the tank. Pull those out and remove the tank from the frame. Open the filler cap and pour the contents into an empty jug and dispose of it properly or dump it into your car (it won't mind). Reverse each step for the reinstallation of your freshly emptied gas tank. Good luck! ~Kyle Quote
racer Posted October 12, 2009 Report Posted October 12, 2009 Pull the hose off the 'tee', aim it towards not you. Open petcock to 'res'. PS, a shot of air in the vent line will decrease your drain time. Quote
sinisterboo Posted October 12, 2009 Report Posted October 12, 2009 4 bolts in the gas tank? mines lucky it has 2 in it, LOL. and Im lucky if they match! Quote
Snopczynski Posted October 13, 2009 Report Posted October 13, 2009 Ummmmmmm, Put a hose on the petcock, and turn it to reserve. When it gets low, rock the bike. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.