Goombats Posted October 5, 2009 Report Posted October 5, 2009 Hey Guys, I am new on ths forum. Figure I give it a shot. Anyway.... I have a 2000 Banshee. The motor was just rebuild, new crank, bore, pistons etc.. After putting everything together, we realize there is no spark. I went through all troubleshooting methods. Stator has correct resistances, there is continuity in the wiring harness, the primary coil reads .4 ohms which is sligthly hire then .38 but Im sure thats not an issue. The secondary windings have correct resistance. Everything checks up, however this is still no spark. Oh Btw I just tried a new CDI in it and nothing. I think there is a grounding issue. Can you tell me where are all the grounds on the banshee? Thank You for your time. Quote
banshee_terror_ Posted October 5, 2009 Report Posted October 5, 2009 i know theres a ground on that little box right next 2 the cdi Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.