cjcrete Posted October 4, 2009 Report Posted October 4, 2009 Anybody know where to pick up a ball joint socket tool for roll design a-arms. Or any ideas what else i could use?? I'm sending these lobo arms out to get coated but need to get these ball joints out first. Thanks for he help! cj Quote
Meat Posted October 5, 2009 Report Posted October 5, 2009 Looks like I can pry out the retainer clip with a sharp awl and three hands on the set I have.... I'll get some pictures posted tomorrow/later today. Quote
cjcrete Posted October 5, 2009 Author Report Posted October 5, 2009 Looks like I can pry out the retainer clip with a sharp awl and three hands on the set I have.... I'll get some pictures posted tomorrow/later today. These ball joints are threaded in, No retainer clips Quote
racer Posted October 7, 2009 Report Posted October 7, 2009 Post a pic please. Otherwise: 1) Mill 2) Lathe 3) ?????? 4) Profit Quote
cjcrete Posted October 7, 2009 Author Report Posted October 7, 2009 Post a pic please. Otherwise: 1) Mill 2) Lathe 3) ?????? 4) Profit I made a tool today, works pretty good, still would like to find the right tool. Quote
cjcrete Posted October 9, 2009 Author Report Posted October 9, 2009 CJ not sure if there is a tool that exists. sorry i didnt return your call been swamped at work. we always used a punch and a hammer. not the best but it worked. No problem Steve, I notched a outer bearing out in the bridgport ant welded it to a 3/4 nut. Worked pretty slick! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.