FitZBanshEe Posted October 4, 2009 Report Share Posted October 4, 2009 My banshee will jump start first try but it won't kick start..when it runs it's also a litle laggy and the idle is weird..it won't idle it jus turns off...is this a problem with the carbs or compression? Both pistons and walls are perfect Quote Link to comment Share on other sites More sharing options...
Drewski Posted October 4, 2009 Report Share Posted October 4, 2009 I would check your compression first off then take it from there Quote Link to comment Share on other sites More sharing options...
FitZBanshEe Posted October 4, 2009 Author Report Share Posted October 4, 2009 Just did the compression is fine Quote Link to comment Share on other sites More sharing options...
Drewski Posted October 4, 2009 Report Share Posted October 4, 2009 Just did the compression is fine then it must be carburation issues. might try posting in the jetting forum for better results. sorry i don't know much about carbuation Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted October 4, 2009 Report Share Posted October 4, 2009 Just did the compression is fine Whats fine though? How much per hole? Quote Link to comment Share on other sites More sharing options...
FitZBanshEe Posted October 4, 2009 Author Report Share Posted October 4, 2009 Each cylinder is 140 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.